Refinish old dirty kitchen cabinets to a durable painted finish. This kitchen located in Kennebunk Maine was restored for less than 1/3 of the price of new cabinets. The finish used is Cabinet Coat by INSLX (Benjamin Moore ) All paints and supplies were provided by ePaintStore.com and Maine Paint Service in Yarmouth Maine. Work perfomed by iPaintMaine.com of New Gloucester and Armstrong-Painting.com of Yarmouth.

customcabinetscalgary.org - click link for Custom Cabinets Calgary information. If you are searching for Custom Cabinets Calgary then you have found the right place here at Affordable Custom Kitchens. Our professional master craftsmen care about three things Your satisfaction....

Visit us online at www.nu-face.net NU-FACE Cabinet Systems is a new kind of cabinet re-facing company. From the start, we did not want to be just another "re-facing" business. Traditionally, cabinet re-facing has been sort of a "lower end" option where the homeowner simply could not afford new cabinets and, because of financial considerations or the desire to keep the countertop, simply had no other option. Most often cheap, particle board doors were used and often the finishes were not stains or paints, but plastic "thermofoil". Even when stains were used, they used thick "dye stains" that were easy and quick to apply but actually hid the grain of the woods and are often used to hide inferior grade wood. Veneers were paper thin and had poor adhesives that would eventually peel off or damage easily. More often than not, these re-facing companies would not even replace the old bent and damaged drawer slides or cabinet hinges. We wanted to offer our customers something better. We wanted to offer our customers a total cabinet solution that was not only superior to other "re-facing" companies, but was equal to, or superior to, new cabinets. With NU-FACE Cabinet Systems, we have accomplished that. We offer several varies of premium quality hardwood doors, use only the best paints, stains & glazes and ALWAYS replace hinges and drawer slides with premium quality hardware. All of our stained doors are hand rubbed and require several steps to complete. Sure it takes us a lot ...

kitchen-remodeling-guide.blogspot.com - Every kitchen eventually reaches the point at which it looks worn-out. That's the time to take stock of your options. Everyone is well aware that kitchen remodeling is costly and inconvenient. However, a simple and low-cost alternative is to paint the cabinets. This option is one that many people fail to consider, despite the fact that older homes often have painted carpenter-built cabinets that have stood up to decades of use. The process is easier than ever, thanks to 100 percent acrylic enamels that produce little odor as they are applied and clean up with soap and water. Instructions ; 1. Start by removing the drawers. 2. Remove the screws & door hinge 3. Remove the two screws that fasten a drawer pull 4. If you are replacing the pulls with new hardware, measure the hole spacing to determine the correct size of replacement pulls. Remove adjustable shelves and any remaining hardware. 5. Use a sponge or nylon scrubber and gently wash all cabinet surfaces using powdered trisodium phosphate (TSP) cleaner dissolved in warm water. Rinse the surfaces and let them dry. Fill dents and scratches with wood filler or drywall compound. 6. Once the previous steps are complete, lightly abrade surfaces to be painted with 120-grit sandpaper. 7. Apply masking tape to surfaces you don't want painted 8. Start painting the interior surfaces of the cabinets. 9. Use a brush to paint the back surface of each drawer face. Be sure the paint is dry before ...

I need to remodel my house's kitchen, including new appliances, cabinets, and flooring. I have no idea how to go about finding a reputable kitchen contractor, and I see Sears does remodels. Anyone have experience with them?

I need to wipe them out and would also like to deter bugs. If i can what ratio would you use?

How to understand the difference between wood and plywood; get professional tips and advice from an expert carpenter on woodworking tools in this free instructional video. Expert: Kevin Mouton Bio: Kevin Mouton has spent the last four years making custom, high end, solid wood and veneer furniture for local and national clients out of a shop in Austin, Texas. Filmmaker: Paul Raila

This house is 45 years old and going on the market. The homeowner felt that it would be a good idea to take the very light, probably shellacked, cabinets, strip them down and give them a richer appearance for less than what it would cost to put in obviously cheap cabinets. It saved a lot of money. The paneling will be covered she said with a type of heavy wall paper. Check out the before videos of a couple of doors. The stain is intentionally dark, it is Antique Walnut plus Brown Mahogany.

Is there a specific process to use? What about product recommendations?

I want a 48" bathroom vanity, I NEED it to have the drawers on the left hand side, and I need it to be 0 or less. Hopefully much less. I have a sink and I have countertop.

I've found that 48" vanities are rare, and the ones out there are usually ridiculously fancy and overpriced. It's nearly impossible to find ANY vanities with drawers on the left, and if I can find any they are either smaller than 48" or ridiculously fancy and overpriced.

So I thought about getting a 24" kitchen base cabinet and a 24" kitchen drawer base cabinet and putting them together to make a 48" sink base. Are there any drawbacks to this?