Comments on: Joinery for Kitchen Cabinet Faceframes Part 1 http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html Discover the important options you must consider before you remodel your kitchen. Thu, 10 May 2012 13:45:10 +0000 hourly 1 http://wordpress.org/?v=3.1 By: mithrandir10001 http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html/comment-page-1#comment-644 mithrandir10001 Fri, 16 Apr 2010 15:20:12 +0000 http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html#comment-644 Nothing wrong with mortice and tenon joints, but for kitchen cabinet face frames, I think it's a bit of overkill. With stand alone furniture, the piece can be moved about and jiggled over time, and potentially cause the screws to loosen, especially if not glued. Kitchen cabinets are fastened in and shouldn't move. Nothing wrong with mortice and tenon joints, but for kitchen cabinet face frames, I think it’s a bit of overkill. With stand alone furniture, the piece can be moved about and jiggled over time, and potentially cause the screws to loosen, especially if not glued. Kitchen cabinets are fastened in and shouldn’t move.

]]> By: TomH127 http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html/comment-page-1#comment-645 TomH127 Wed, 17 Feb 2010 01:27:05 +0000 http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html#comment-645 I used pocket screws for a 2 drawer notebook PC desk built after the kitchen project. Worked well with plate joining biscuits to align the panels and the pocket screws to reinforce the joints. The kitchen remodel was a one time project - time was not a factor. I used pocket screws for a 2 drawer notebook PC desk built after the kitchen project. Worked well with plate joining biscuits to align the panels and the pocket screws to reinforce the joints.
The kitchen remodel was a one time project – time was not a factor.

]]> By: DKAVM http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html/comment-page-1#comment-646 DKAVM Sun, 14 Feb 2010 21:24:14 +0000 http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html#comment-646 Hi couldnt you just use pocket hole screws on the face frame its not like your going to see them and it would be quicker for you in the long run,just an idea. Hi couldnt you just use pocket hole screws on the face frame its not like your going to see them and it would be quicker for you in the long run,just an idea.

]]> By: TomH127 http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html/comment-page-1#comment-647 TomH127 Thu, 15 Jan 2009 02:35:41 +0000 http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html#comment-647 I have improved the fixture since (Do NOT use any bit larger than 1/4"). Chamfered the inner channel boards for better grasp. Also attached a piece to the inner boards parallel to the table 1/8' above the table. I admit this safely works with rail stock 10" or more in length - Do not use too short rail stock. Thanks Tom I have improved the fixture since (Do NOT use any bit larger than 1/4″). Chamfered the inner channel boards for better grasp. Also attached a piece to the inner boards parallel to the table 1/8′ above the table. I admit this safely works with rail stock 10″ or more in length – Do not use too short rail stock.

Thanks

Tom

]]> By: holly123davis http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html/comment-page-1#comment-648 holly123davis Thu, 15 Jan 2009 00:36:42 +0000 http://kitchencabinetdesigninfo.com/joinery-for-kitchen-cabinet-faceframes-part-1.html#comment-648 dont think thats the best way 2 do that mate. dont think thats the best way 2 do that mate.

]]>